You have no items in your shopping cart.
$92.00
No Speed, No Life!
There is nothing worse than your equipment not performing. It limits your ability and it could really make for a bad day. Keep it waxed and keep it fast!
Hot Wax Tuning Kit includes:
Custom Waxing Iron, two high performance Waxes, (X-Wax Cool and X-Wax Rub-on) Plastic 6" Scraper, P-Tex Candles, Fibertex Pad, Custom Bag to carry just about everything you need to tune your equipment. Complete Instructions.
Waxing, Scraping, Iron Instructions:
1. Select correct temperature specific wax by checking mountain conditions/snow report...(actual snow temperature, not air).
2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE!
3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail.
4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper.
5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast.
Tuning Instructions:
1. Place board or skis in a vise to secure and clean base with a fresh hot wax job and scrape or use ONE MFG Base Cleaner. .
2. Check the side and base edges for burrs. Rub a ceramic, diamond or gummy stone over the area to remove burrs in preparation for edge shaping.
3. Use the ONE MFG Edge Tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction... look for the arrow.
4. If you like your board or skis to be catch-free in the tip and tail then de-tune using a de-burring stone to round the edges on the tip and tail. Start on the edges as they curve up into the tail and nose and file down approx. 1.5" past the edge contact point as your base lays flat.
5. For really sharp edges, take a fine diamond stone or polishing stone and go over the edge again using the same technique.
6. If you like to jib rails and boxes, don't sharpen your edges much to keep them catch-free.
Keep your edge tool clean with the file brush!
Enjoy your Speed!
Availability:
10 In Stock
One-Ball
No Speed, No Life!
There is nothing worse than your equipment not performing. It limits your ability and it could really make for a bad day. Keep it waxed and keep it fast!
Hot Wax Tuning Kit includes:
Custom Waxing Iron, two high performance Waxes, (X-Wax Cool and X-Wax Rub-on) Plastic 6" Scraper, P-Tex Candles, Fibertex Pad, Custom Bag to carry just about everything you need to tune your equipment. Complete Instructions.
Waxing, Scraping, Iron Instructions:
1. Select correct temperature specific wax by checking mountain conditions/snow report...(actual snow temperature, not air).
2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE!
3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail.
4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper.
5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast.
Tuning Instructions:
1. Place board or skis in a vise to secure and clean base with a fresh hot wax job and scrape or use ONE MFG Base Cleaner. .
2. Check the side and base edges for burrs. Rub a ceramic, diamond or gummy stone over the area to remove burrs in preparation for edge shaping.
3. Use the ONE MFG Edge Tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction... look for the arrow.
4. If you like your board or skis to be catch-free in the tip and tail then de-tune using a de-burring stone to round the edges on the tip and tail. Start on the edges as they curve up into the tail and nose and file down approx. 1.5" past the edge contact point as your base lays flat.
5. For really sharp edges, take a fine diamond stone or polishing stone and go over the edge again using the same technique.
6. If you like to jib rails and boxes, don't sharpen your edges much to keep them catch-free.
Keep your edge tool clean with the file brush!
Enjoy your Speed!
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
If you’re looking to return or exchange your order for whatever reason, we're here to help! We offer free return shipping on exchanges within 30 days of receiving your order. You can return your product for store credit, a different product, or a refund to the original payment method. R
Please note the following exceptions to our return and exchange policy:
- Discounted items are final and cannot be returned or exchanged
- Returned items must have tags still on and be returned in original packaging
To initiate a return or exchange, please complete the following steps:
- Call or email with you reason for return. If damaged, please provide images of the damage.
- Choose the products you wish to return or exchange from your order
- Print your prepaid shipping label that you will receive by email
- Send all items back to us using the label provided
Also Purchased
4WD Snow Wax
Race proven formulas using the highest quality of hydrocarbon waxes. No additives. Available in four temperatures that offer the best value in the industry! Warm = 32F to 26F (0C to...
$16.00
Large Edge Tool
A must have for sharpening edges. 90 & 88 degree sharpening tool. Sold in singles. Tuning Instructions: 1. Place board or skis in a vise to secure and clean base...
$15.00
Waxing Iron with 65g Bar Wax
The One Mfg Hot waxing iron is an awesome way to go faster! Our newly designed snowboard waxing iron comes with a thicker base for easier & better waxing! The...
$61.00
Union Ankle Sawblade and Ankle Connector New Generation
Replace lost or worn-out ankle sawblades and ankle connectors.
Includes: Ankle Sawblades x 2Ankle Connectors x 2Compatibility:
Ankle Sawblade: All Union Bindings Ankle Connector: Forma Lab / Elite Ankle Straps
$10.00
Waxing Brushes
A must after every hot wax for maximum speed! Size: 3" x 5" The best brush to use most of the time to remove excess wax and polish the base. Instructions:...
From $15.00
F-1 Push Up Snow Wax
Push up wax & polish into your base with the cork applicator. F-1 all temperature hydrocarbon wax. This is a great wax to carry in your jacket and apply between...
$19.00
X-Wax Snow Wax
The X-Wax series is the fastest offering from Oneball besides our race wax! Because second still sucks! X-Wax is formulated with Fluorinated Paraffin’s, not CFC’s or PTFE chemicals. The X-Wax 70...
$30.00
