You have no items in your shopping cart.
$91.00
No Speed, No Life!
There is nothing worse than your equipment not performing. It limits your ability and it could really make for a bad day. Keep it waxed and keep it fast!
Hot Wax Tuning Kit includes:
Custom Waxing Iron, two high performance Waxes, (X-Wax Cool and X-Wax Rub-on) Plastic 6" Scraper, P-Tex Candles, Fibertex Pad, Custom Bag to carry just about everything you need to tune your equipment. Complete Instructions.
Waxing, Scraping, Iron Instructions:
1. Select correct temperature specific wax by checking mountain conditions/snow report...(actual snow temperature, not air).
2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE!
3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail.
4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper.
5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast.
Tuning Instructions:
1. Place board or skis in a vise to secure and clean base with a fresh hot wax job and scrape or use ONE MFG Base Cleaner. .
2. Check the side and base edges for burrs. Rub a ceramic, diamond or gummy stone over the area to remove burrs in preparation for edge shaping.
3. Use the ONE MFG Edge Tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction... look for the arrow.
4. If you like your board or skis to be catch-free in the tip and tail then de-tune using a de-burring stone to round the edges on the tip and tail. Start on the edges as they curve up into the tail and nose and file down approx. 1.5" past the edge contact point as your base lays flat.
5. For really sharp edges, take a fine diamond stone or polishing stone and go over the edge again using the same technique.
6. If you like to jib rails and boxes, don't sharpen your edges much to keep them catch-free.
Keep your edge tool clean with the file brush!
Enjoy your Speed!
Availability:
10 In Stock
One-Ball
No Speed, No Life!
There is nothing worse than your equipment not performing. It limits your ability and it could really make for a bad day. Keep it waxed and keep it fast!
Hot Wax Tuning Kit includes:
Custom Waxing Iron, two high performance Waxes, (X-Wax Cool and X-Wax Rub-on) Plastic 6" Scraper, P-Tex Candles, Fibertex Pad, Custom Bag to carry just about everything you need to tune your equipment. Complete Instructions.
Waxing, Scraping, Iron Instructions:
1. Select correct temperature specific wax by checking mountain conditions/snow report...(actual snow temperature, not air).
2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE!
3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail.
4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper.
5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast.
Tuning Instructions:
1. Place board or skis in a vise to secure and clean base with a fresh hot wax job and scrape or use ONE MFG Base Cleaner. .
2. Check the side and base edges for burrs. Rub a ceramic, diamond or gummy stone over the area to remove burrs in preparation for edge shaping.
3. Use the ONE MFG Edge Tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction... look for the arrow.
4. If you like your board or skis to be catch-free in the tip and tail then de-tune using a de-burring stone to round the edges on the tip and tail. Start on the edges as they curve up into the tail and nose and file down approx. 1.5" past the edge contact point as your base lays flat.
5. For really sharp edges, take a fine diamond stone or polishing stone and go over the edge again using the same technique.
6. If you like to jib rails and boxes, don't sharpen your edges much to keep them catch-free.
Keep your edge tool clean with the file brush!
Enjoy your Speed!
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
If you’re looking to return or exchange your order for whatever reason, we're here to help! We offer free return shipping on exchanges within 30 days of receiving your order. You can return your product for store credit, a different product, or a refund to the original payment method. R
Please note the following exceptions to our return and exchange policy:
- Discounted items are final and cannot be returned or exchanged
- Returned items must have tags still on and be returned in original packaging
To initiate a return or exchange, please complete the following steps:
- Call or email with you reason for return. If damaged, please provide images of the damage.
- Choose the products you wish to return or exchange from your order
- Print your prepaid shipping label that you will receive by email
- Send all items back to us using the label provided
Also Purchased
Jessup Griptape - 9"
Jessup The Original® Skateboard Griptape Sheets, available as sheets or packs (Black) Bubble free & easy to apply Provides rock solid bonding to deck surface, conformability, easy to trim without...
$8.00
Bones Reds
Features Single, non-contact, removable rubber shield for easy cleaning and less friction High speed Nylon™ ball retainer for greater strength and speed Pre-lubricated with Speed Cream™ racing lubricant Skate Rated™...
$22.00
Mob Griptape - 9"
The #1 griptape choice of professional skateboarders.Mob Grip features:- Hundreds of barely-visible perforations that allow air to escape for a bubble-free application- Exclusive silicon-carbide grit binding process for grip that...
$8.00
Independent Hardware
Independent Genuine Parts hardware is specified to the highest standards. Each set features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended...
$4.00
Mini Logo Hardware
8 Nuts and 8 Bolts per pack!
High quality steel
Available in 7/8", 1.0", 1.25" and 1.50" to cover all your skateboards set-ups
Lifetime warranty against manufacturer defects
$3.00
Mini-logo Bearings
The best value in skateboard bearings you could ever ask for with 2 easy to clean rubber shields to eliminate dirt and debris and even fast than the last generation...
$15.00
Independent Trucks Stg11
Durable all purpose truck for any type of skateboarding.55mm tall for optimal performance and wheel clearance with wheels 56mm and under.A356 T6 Aluminum Hanger & BaseplateThe best lightweight aluminum alloy...
$59.00
