You have no items in your shopping cart.
$28.00
X-WAX FIVE PACK
One bar of each temperature and a bar of Base Prep wax.
45 grams per bar / x 5 Bars = 225g Total
MINERAL SPEED ADDITVE TECHNICAL SPECS / SKI WAX UPDATE
NEW for 2021 Mineral Speed Additive Formulas breakdown
The X-Wax series Snowboard/ Ski wax is the fastest wax we make!
- X-Wax Mineral Speed Additives are a blend of natural additives that greatly reduce friction when used in combination of one another and have incredible speed producing qualities.
X-Wax Mineral Speed Additives work with anti-friction, reduced surface tension, and hydrophobic additives that increase speed, glide, acceleration, and durability in all snow conditions.
- Keep Accelerating! X-wax will increase your speed in aggressive and even wet snow. You will actually feel it take off and keep accelerating.
- X-Wax Mineral Speed Additive formulas will not be affected by varying snow temperatures and standing water in the snow. Example: Cold aggressive snow at the top of a course and then warmer and wetter bottom. How would you wax? If you wax for flat, gliding part of the course and it’s the most wet you might end up over fluorinating the base making it run slow at the top. With the X-Wax MSA line you don’t have to worry. And you don’t have to worry about waxing too many additives into the base from consecutive waxing. Which is a typical issue on the race series. Also called, “over juicing.”
- No Fluorinated chemicals of any kind are used.
- Temperature Range
- Warm = 28ºF< (-2ºC)
- Cool = 28ºF to 21ºF (-2ºC to -6ºC)
- Cold = 21ºF to 5ºF (-6ºC to -15ºC)
- Ice Cold = 12ºF & below (-11ºC & below)
Size: 225 grams / 45 grams per bar
Colors: Dark Grey/Black
Directions: X-Wax packaged in the clamshell has an additive bar and a not additive bar. The additive bar is highly concentrated and should be melted on before adding the colored wax. The additives increase speed and the durability of the wax on the base. You maybe use a 50/50 split or for really cold days use a little more of the additive bar.
Your base will be slightly grey when done brushing but that is a good thing. The grey tint will rub off in time from use. (It does not harm your base)
Use: Hot Waxing X-Wax: Base must be clean & dry. Choose a temperature specific wax to match snow conditions for best results.
Hot Wax Application: To apply, hold both bars together and melt a 50/50 split. Iron it in. For less additive, simply use less of the additive bar. (Save it for that super cold, or slushy day for example.
Smooth the wax out with the iron to cover completely for about 10 mins. Keep iron moving around. Let the wax cool completely and scrape with a plastic scraper. Brush out remaining wax. When using Pro Tip: ICE COLD temperature. Always scrape when the wax cools and brush out. Room temperature is ideal.
Rub On Application: Apply wax to base by hand and cover completely. Use a waxing cork to polish wax into base with firm pressure. A scraper can be used and then use a waxing brush to polish the base...horse-hair brush is best for this.
Bulk Bars: Are pre-mixed. Hot wax as usual.
Availability:
2 In Stock
One-Ball
X-WAX FIVE PACK
One bar of each temperature and a bar of Base Prep wax.
45 grams per bar / x 5 Bars = 225g Total
MINERAL SPEED ADDITVE TECHNICAL SPECS / SKI WAX UPDATE
NEW for 2021 Mineral Speed Additive Formulas breakdown
The X-Wax series Snowboard/ Ski wax is the fastest wax we make!
- X-Wax Mineral Speed Additives are a blend of natural additives that greatly reduce friction when used in combination of one another and have incredible speed producing qualities.
X-Wax Mineral Speed Additives work with anti-friction, reduced surface tension, and hydrophobic additives that increase speed, glide, acceleration, and durability in all snow conditions.
- Keep Accelerating! X-wax will increase your speed in aggressive and even wet snow. You will actually feel it take off and keep accelerating.
- X-Wax Mineral Speed Additive formulas will not be affected by varying snow temperatures and standing water in the snow. Example: Cold aggressive snow at the top of a course and then warmer and wetter bottom. How would you wax? If you wax for flat, gliding part of the course and it’s the most wet you might end up over fluorinating the base making it run slow at the top. With the X-Wax MSA line you don’t have to worry. And you don’t have to worry about waxing too many additives into the base from consecutive waxing. Which is a typical issue on the race series. Also called, “over juicing.”
- No Fluorinated chemicals of any kind are used.
- Temperature Range
- Warm = 28ºF< (-2ºC)
- Cool = 28ºF to 21ºF (-2ºC to -6ºC)
- Cold = 21ºF to 5ºF (-6ºC to -15ºC)
- Ice Cold = 12ºF & below (-11ºC & below)
Size: 225 grams / 45 grams per bar
Colors: Dark Grey/Black
Directions: X-Wax packaged in the clamshell has an additive bar and a not additive bar. The additive bar is highly concentrated and should be melted on before adding the colored wax. The additives increase speed and the durability of the wax on the base. You maybe use a 50/50 split or for really cold days use a little more of the additive bar.
Your base will be slightly grey when done brushing but that is a good thing. The grey tint will rub off in time from use. (It does not harm your base)
Use: Hot Waxing X-Wax: Base must be clean & dry. Choose a temperature specific wax to match snow conditions for best results.
Hot Wax Application: To apply, hold both bars together and melt a 50/50 split. Iron it in. For less additive, simply use less of the additive bar. (Save it for that super cold, or slushy day for example.
Smooth the wax out with the iron to cover completely for about 10 mins. Keep iron moving around. Let the wax cool completely and scrape with a plastic scraper. Brush out remaining wax. When using Pro Tip: ICE COLD temperature. Always scrape when the wax cools and brush out. Room temperature is ideal.
Rub On Application: Apply wax to base by hand and cover completely. Use a waxing cork to polish wax into base with firm pressure. A scraper can be used and then use a waxing brush to polish the base...horse-hair brush is best for this.
Bulk Bars: Are pre-mixed. Hot wax as usual.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
If you’re looking to return or exchange your order for whatever reason, we're here to help! We offer free return shipping on exchanges within 30 days of receiving your order. You can return your product for store credit, a different product, or a refund to the original payment method. R
Please note the following exceptions to our return and exchange policy:
- Discounted items are final and cannot be returned or exchanged
- Returned items must have tags still on and be returned in original packaging
To initiate a return or exchange, please complete the following steps:
- Call or email with you reason for return. If damaged, please provide images of the damage.
- Choose the products you wish to return or exchange from your order
- Print your prepaid shipping label that you will receive by email
- Send all items back to us using the label provided
Also Purchased
Jessup Griptape - 9"
Jessup The Original® Skateboard Griptape Sheets, available as sheets or packs (Black) Bubble free & easy to apply Provides rock solid bonding to deck surface, conformability, easy to trim without...
$8.00
Bones Reds
Features Single, non-contact, removable rubber shield for easy cleaning and less friction High speed Nylon™ ball retainer for greater strength and speed Pre-lubricated with Speed Cream™ racing lubricant Skate Rated™...
$22.00
Mob Griptape - 9"
The #1 griptape choice of professional skateboarders.Mob Grip features:- Hundreds of barely-visible perforations that allow air to escape for a bubble-free application- Exclusive silicon-carbide grit binding process for grip that...
$8.00
Independent Hardware
Independent Genuine Parts hardware is specified to the highest standards. Each set features cross logo heads, full size nylon lock nuts, full size bolt heads with Cross insignia, and extended...
$4.00
Mini Logo Hardware
8 Nuts and 8 Bolts per pack!
High quality steel
Available in 7/8", 1.0", 1.25" and 1.50" to cover all your skateboards set-ups
Lifetime warranty against manufacturer defects
$3.00
Mini-logo Bearings
The best value in skateboard bearings you could ever ask for with 2 easy to clean rubber shields to eliminate dirt and debris and even fast than the last generation...
$15.00
Independent Trucks Stg11
Durable all purpose truck for any type of skateboarding.55mm tall for optimal performance and wheel clearance with wheels 56mm and under.A356 T6 Aluminum Hanger & BaseplateThe best lightweight aluminum alloy...
$59.00
